AGITATOR TYPE KRW 120
The TURBO-Mixer agitators of type KRW 120 are suitable as high-speed mixers for all low-viscosity mixing materials.
They are operated with 230 V alternating current.
In the standard version, the agitators must not be used in through-flow operation, but they can be designed for this purpose.
AGITATOR TYPE KRW 120
The TURBO mixer agitators of type KRW 120 are suitable as high-speed mixers for all low-viscosity mixing materials.
They are operated with 230 V AC.
The standard version of the agitators must not be used in pass-through operation, but they can be designed for this.
DRIVE, BEARING, SEAL
The motor of the KRW 120 has a reinforced bearing.
The connection of the shaft to the motor is firmly glued and therefore not detachable. Depending on the application, the agitator is equipped with:
- of a bearing lantern,
- a sealing flange or
- of a sealing lantern (V-ring, shaft seal, mechanical seal, stuffing box, etc.).
MIXER SHAFT AND MIXING BLADE
The mixer shaft is made of solid material. The stainless steel or steel shaft can be additionally machined – depending on the application environment:
- Sheathing made of PP or PVDF
- Coating with ECTFE (Halar) or rubber coating
- Surface treatment such as ground, polished, nitrided, chrome plated, nickel plated….
The wavelength depends on the operating conditions. An additional bearing may be necessary.
The following versions are possible for the mixing blade:
- Same material as the shaft (standard)
- For jacketed or coated shaft: Mixing vane made of plastic (PP or PVDF) or coated.
The connection of the mixing blade to the shaft (thread, power screws, welded …) is just as dependent on the area of application as the number, shape and size of the blades.
TURBO-Mixer will advise you on the selection and dimensioning of mixing blades for the desired area of application.
FASTENING OF THE AGITATOR
The agitator is connected directly to the vessel either by flange or clamp. Or it is mounted on a stand (with or without container clamping device), a wall suspension or a crossbeam and immersed into the container from there.
The mounting devices mentioned are available from TURBO-Mixer – also designed according to customer specifications.
All mixers are manufactured by TURBO-Mixer in Germany. The components used – such as motors and gearboxes – are German makes. The agitators are designed for the respective application in such a way that optimum energy efficiency is achieved.
TURBO-Mixer configures and manufactures the agitator according to your requirements. Please contact us today.
TURBO-Mixer mixing and processing technology is certified according to ISO 9001:2015.